Bush Hog’s compact rear blades are the ideal choice for light duty landscaping, driveway maintenance, or snow removal. These light duty blades are rated for use on two-wheel drive tractors up to 24 PTO horsepower and four-wheel drive tractors up to 15 PTO horsepower. The moldboard may be reversed for backfilling and angled left or right for use in a wide variety of applications. Tilting of the blade is achieved by adjustment of the tractor’s 3-point hitch arms.
Available in 4, 5, and 6-foot operating widths.
Place your mouse over the image to enlarge any portion of the product below.
NOTE: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.
- Three angle position moldboard
- Reversible moldboard
- Available in tractor colors
- Quick hitch capable
- Lower hitch position for small tractors
- A Frame Construction
- 1/4 Inch Moldboard
- Welded On Cutting Edge
- Powder Coat Paint
|MOLDBOARD WIDTH||4, 5 & 6 ft.|
|MOLDBOARD HEIGHT AND THICKNESS||12 in. x 1/4 in.|
|MOLDBOARD CUTTING EDGE||3/8 in. x 3 in.|
|HITCH||3-Pt. Cat. l, Cat I Quick Hitch|
|APPROXIMATE WEIGHT||136 lbs. (4 ft.), 150 lbs. (5 ft.), 164 lbs. (6 ft.)|
|MAX. TRACTOR HP (PTO) 2-WHEEL DRIVE||24 HP|
|MAX. TRACTOR HP (PTO) FRONT WHEEL ASSIST||15 HP|
|KING PIN DIAMETER||1 1/4 in. Grade 8|
|TILT ADJUSTMENT||3-Pt. Hitch|
|ANGLE ADJUSTMENT||5 forward positions up to 30º, 3 reverse positions up to 15º|
|FEATURE: Available in major tractor colors|
|SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE|