Bush Hog®
3210 Lift Series Multi-Spindle Rotary Cutters

3210 Series (Available in a Lift, Pull, Semi-Mount & Offset Models)

The heavy duty 3210 cuts a 10-feet 6-inch swath and is available as pull, lift, semi-mount and offset models. With a high blade tip speed, the 3210 gives a clean cut in heavy grass, weeds and small brush.

Bush Hog’s entire line of multi-spindle rotary cutters is designed for heavy crop clearing, pasture maintenance, and other big jobs that require a durable, reliable machine. With cutting widths from 8 to 15 feet, and a range of hitch types and mounting options, these machines are built to withstand extreme duty and provide superior performance and productivity with minimal maintenance for many, many years.

Place your mouse over the image to enlarge any portion of the product below.

NOTE: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Features

Performance Features
  • 3210 Series comes in a Lift, Pull, Semi-Mount & Offset Model
  • Rubber Element Cross Shafts
  • Heavy Duty Cushioned Axles
  • Two Round Blade Holders
  • See Specifications Page For Models 3210 & 3210 Offset
Construction Features
  • 10-gauge Deck Construction
  • 7-gauge Strongbacks
  • 1/4-inch Sidebands
  • Rubber Cushioned Axle Arms
  • 5 Year Gearbox Limited Warranty
  • Powder Coat Paint
Product Features
  • All Bush Hog® Multi-Spindle rotary cutters feature structural steel bracing and reinforced welding at all high stress points. Streamlined deck design inhibits trash and water buildup problems.

  • Shields over all cross shafts fold conveniently out of the way to allow quick access to clutch or universal joints.

  • Special rubber-cushioned axle arms reduce shock loads during operation and transport.

  • A wide angle, constant velocity driveshaft on pull models relieves the PTO working angle. This reduces vibration and allows smoother cutting in sharp turns.

Specifications

Model 3210 3210 Offset
Cutting Width 10-feet 6-inches 10-feet, 6-inches
Cutting Capacity Up to 3-inches Up to 3-inches
Cutting Height 2 to 13-inches 2 to 13-inches
Dimensions (width x Length) 11-feet 1-inch x 9-feet 10-inches (Lift) 11-feet, 1-inch x 13-feet, 5-inches (Pull)
Type Hitch 3-Point Cat. II & III Standard & Quick Hitch Cat. II & III Semi-Mount and Center Pull (Self-Leveling) Pull Type (Self-Leveling); (7-feet, 10-inches Offset Beyond Tractor Center Line)
Deck Thickness 10-gauge 10-gauge
Side Bands 1/4-inch x 10-inches 1/4-inch x 10-inches
Minimum Tractor HP 50 PTO (Pull); 60 PTO (Lift) 50 PTO
Driveline ASAE Category 5 (540 RPM – Lift, Pull & Semi-Mount); ASAE Cat. 4 (1,000 RPM Pull) ASAE Category 5
Cross Shaft ASAE Cat. 5 Rubber Element ASAE Cat. 5 Rubber Element
Gearbox HP (3) 210 Center and 205 Outboard (3) 210 Main and 205 Outboard
Tractor PTO Speed 540/1,000 RPM 540 RPM
Driveline Protection 4 Plate PTO Slip Clutch 4 Plate PTO Slip Clutch
Height Adjustment Manual or Hydraulic Manual or Hydraulic
Blade Holder(s) Round Round
Blades 1/2-inch x 4-inches – Uplift 1/2-inch x 4-inches – Uplift
Blade Tip Speed 16,881 FPM/540 RPM; 17,400/1,000 RPM 16,881 FPM/540 RPM;17,400/1,000 RPM
Blade Overlap 3-inches 3-inches
Tires Laminated, Airplane (Pull Only) Laminated, Airplane
Axles Rubber Cushioned; Choice of Single or Dual Axle for Pull Models Rubber Cushioned; Choice of Single or Dual Axle
Deflectors Selection: Front Chains and Rear Bands or Chains Selection: Front Chains and Rear Bands or Chains
Safety Tow Chain Standard for Pull Models Standard
Approximate Weight (Pull with Single Axle) 2,741-lbs. (Pull with Single Axle) 2,624-lbs.
Warranty 1-year limited warranty with a 5-year gearbox limited warranty 1-year limited warranty with a 5-year gearbox limited warranty
Features • High Blade Tip Speeds • High Blade Tip Speeds
• Deep Sidebands • Deep Sidebands

Literature & Manuals

Product Videos