Bush Hog®
PA Series Pasture Aerators

PA Series (PA8 and PA10)

The PA series pasture aerators from Bush Hog are designed for use anywhere soil compaction exists. Available in eight foot or ten foot models, the PA series units are equipped with twisted shanks that serve both to lift and fracture compacted soil. This dual action design improves the intake of water and nutrients and creates improved soil growing conditions. The PA series aerators are ideal for a wide range of potential users including hay producers, cattlemen, sod farmers and landscapers. Give the PA series aerators a chance to make a difference in your soil’s potential today!

Place your mouse over the image to enlarge any portion of the product below.

NOTE: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Features

Performance Features
  • Heavy duty bearing hangers
  • Built-in weight box
  • Angled rotor adjustment from 2.5° to 7.5°
  • Powder Coat Paint
Product Features
  • Angled rotor adjustment from 2.5° to 7.5° allows the user to achieve even more soil fracturing as the gangs are offset

  • Heavy duty bearing hangers support the twisted shank rotors

  • Built-in weight box to ensure maximum soil penetration (weights not included)

Specifications

MODEL PA8 PA10
TRACTOR HORSEPOWER REQUIREMENTS 40 to 90 HP
WORKING WIDTH 86 in. 116 in.
OVERALL WIDTH 97-3/8 in. 127-5/8 in.
OVERALL LENGTH 136 in. in transportation position
OVERALL HEIGHT (with tines on the ground) 44-1/4 in.
WEIGHT (LBS) [approximate] 1950 2500
MAX. BALLAST IN WEIGHT BOX 2200 lbs. (PA8) 2900 lbs. (PA10)
[weight box comes standard with the unit] (weight not included)-lbs.
NUMBER OF TINES 24 LH & 24 RH 32 LH & 32 RH
TINE MATERIAL Forged & heat treated through steel
TINE HUB SPACING 7-1/2 in.
TINE PENETRATION Up to 8-1/8 in. depending on ground condition
FRAME CONSTRUCTION 4 in. square tubing; all welded construction
MAIN TONGUE BEAM 4 in. square
ROTOR/TINE SUPPORT HANGERS 1 in. x 7 in. heavy duty hangers
ROTOR BEARINGS Heavy duty greaseable bearings
ROTOR BEARING PROTECTION 3/8 in. x 3-1/2 in. metal housing
ROTOR ANGLE ADJUSTMENT 2.5°, 5°, 7.5°
TIRES & WHEELS 9-1/2L x 15 tires on 15 in. - 5 bolt wheels
TINE DEPTH CONTROL Add cylinder donuts to cylinder rod (included)
HYDRAULIC CYLINDER 3-1/2 in. x 8 in.
TRANSPORTATION LOCK Manual cylinder lock
REAR AXLE PIVOT greaseable

Literature & Manuals