Bush Hog® 2815 Flex-Wing Rotary Cutters
How could Bush Hog® make the best Flex-Wings even better?
Simply put… More value for your investment! The 2815 Flex-Wing is easier to service and has features that maximize performance and durability in all uses. Whether it’s corn stalk shredding, pasture maintenance or roadside cutting, the 2815 is unsurpassed in performance, durability, and reliability.
Notes: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.
Performance Features
- Wing skids are 3/8 inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.
- Center section blades properly align with center wheels to closely cut out the bottom of ditches.
- Grease fittings and spring steel bushings at axle pivot points for longer life.
- Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.
- Optional grass/row crop baffles for improved distribution in grass and corn stalk shredding.
Construction Features
- Center section axle spindles are centered on the axle arm for equalized loading of vertical forces.
- Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked.
- All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times.
- Greaseable Axle Pivot Points with spring steel bushings
- Turnbuckle alignment with wing hinge pin ensures long life of turnbuckle and less hinge wear.
- Powder Coat Paint
Safety Features
- Improved design of wing sidebands means less damage caused by sideband-to-ground contact.
Product Features
The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.
Good for Tractors rated 40hp or under
Specifications
Models
2815
Cutting Width
15′
Cutting Height
2″ – 14″
Cutting Capacity
4″
Transport Width*
8′ 2″
Transport Height**
7′ 3″
Transport Length***
15′ 3″
Approximate Weight (lb.)
5,500
Approximate Tongue Weight (lb.)
1,900
Minimum Tractor PTO HP
60
Hitch
“Perma-Level”
Center Deck
11ga over 7ga
Wing Decks
7ga
Wing Cutting Angles
22° Down and 45° Up
Wing Level Adjustment
Turnbuckles
Sidebands
1/4″ x 13 1/2″
Transfer Gearbox (HP)
250
Cutting Gearboxes (HP)
225
Input Driveline
Category 6
Cutting Drivelines
Category 4
Blade Holder
7ga Round
Blades
1/2″ x 4″
Blade Tip Speed (fpm)
16,268
Axle Suspension
Springs @ Each Axle
Center & Wing Hydraulics
3 Hoses Standard
Safety Tow Chain
Standard
Distribution Baffles
Optional
PTO Driveline Support
Optional
Warranty
10-Year Gearbox Limited Warranty
1-Year Machine Limited Warranty
*Measured from Wing Skid to Wing Skid when Folded
**Measured at Maximum Transport Height
***Measured from hitch tip to rear of 21″ Laminated Tire
Videos
Play Video
