Bush Hog® 2215 Flex-Wing Rotary Cutter

Medium-Duty Plus Flex-Wing

The Bush Hog® model 2215 Flex-Wing rotary cutter is designed to cut grass, weeds, and brush up to 3 1/2” in diameter. It is recommended for use in pasture maintenance, crop shredding, and roadside maintenance. With maintenance friendly features such as EZ clean decks, EZ lube drivelines and Bush Hog® tough durability, the 2215 is another Flex-Wing example of Bush Hog® Performance You Can Count On.

2215 feature
Notes: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Performance Features

  • Wing skids are 3/8 inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.
  • Center section blades properly align with center wheels to closely cut out the bottom of ditches.
  • Grease fittings and spring steel bushings at axle pivot points for longer life.
  • Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.
  • Optional grass/row crop baffles for improved distribution in grass and corn stalk shredding.

Construction Features

  • Center section axle spindles are centered on the axle arm for equalized loading of vertical forces.
  • Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked.
  • All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times.
  • Greaseable Axle Pivot Points with spring steel bushings
  • Turnbuckle alignment with wing hinge pin ensures long life of turnbuckle and less hinge wear.
  • Powder Coat Paint

Safety Features

  • Improved design of wing sidebands means less damage caused by sideband-to-ground contact.

Product Features

 

Good for Tractors rated 40hp or under

Specifications

Models
2215
Cutting Width
15′
Cutting Height
2″ – 14″
Cutting Capacity
3 1/2″
Transport Width*
8′ 2″
Transport Height**
7′ 3″
Transport Length***
15′ 3″
Approximate Weight (lb.)
4,700
Approximate Tongue Weight (lb.)
1,800
Minimum Tractor PTO HP
60
Hitch
“Perma-Level”
Center Deck
10ga
Wing Decks
10ga
Wing Cutting Angles
22° Down and 45° Up
Wing Level Adjustment
Turnbuckles
Sidebands
1/4″ x 13 1/2″
Transfer Gearbox (HP)
250
Cutting Gearboxes (HP)
210
Input Driveline
Category 6
Wing Drivelines
Category 4
Blade Holder
7ga Round
Blades
1/2″ x 4″
Blade Tip Speed (fpm)
16,286
Axle Suspension
Springs @ Each Axle
Center & Wing Hydraulics
3 Hoses Standard
Safety Tow Chain
Standard
Distribution Baffles
Optional
PTO Driveline Support
Optional
Warranty
10-Year Gearbox Limited Warranty
1-Year Machine Limited Warranty

 

*Measured from Wing Skid to Wing Skid when Folded

 

**Measured at Maximum Transport Height

 

***Measured from hitch tip to rear of 21″ Laminated Tire

Videos

 

 

Privacy Preference Center