Bush Hog® 2814 Flex-Wing Rotary Cutter

Newest Flex-Wing Model 2814

The New 2814 Single Flex-Wing fits the bill when double wing cutters are prohibited by county or state governments due to the danger of having the left wing stick out into the road. And spanning 14 feet, the 2814 covers a lot of ground. The 2814 is equally at home in maintaining orchards, trimming row crops residue, or general field clearing. These cutters are packed with performance features like a rugged, center dual deck design, heavy-duty 250HP Transfer Gearbox, dependable 225HP cutting gearboxes with sight windows to quickly and safely check the oil, and independent spring-cushioned suspension at each wheel. The 2814 also comes standard with Double Row Chains as recommended for additional safety from thrown objects when mowing along roadsides, as well as Deck Rings for added strength and protection from blade deflection.

The 2814 is available with either a Ball or Perma-Level Hitch, 540 or 1000 RPM CV input drivelines, Dual or Walking Tandem Axles, and 6 Selections of tires.

The 2814 is another example that “If It Doesn’t Say BUSH HOG®, It Just Won’t Cut It.™”

Notes: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Performance Features

  • Perma-level hitch allows the cutter to glide along ground contours
  • Wings are free to float 22° down and 45° up without engaging the hydraulic cylinder for longer cylinder life
  • Each cutting gearbox has the industry’s first massive 3-inch output shaft with deeper splines for maximum transmission of torque to the blade pan.
  • Heavy-duty CV drivelines transfer power from the tractor PTO to the Transfer Gearbox
  • Independent coil springs at each wheel take the brunt of rough field conditions instead of the axle
  • Bush Hog® branded blades rip through tough vegetation

Construction Features

  • Decks are smooth on top as well as the underside for easy cleanup and better flow of clippings
  • Deck rings come standard to provide additional deck support and to protect the deck from blade deflection
  • 7ga reinforced blade pans protect the cutter, blade bar, and gearbox output shaft from unexpected obstacles
  • Tough ¼” thick wing skids are formed at a 45° angle to protect the sidebands and reduce digging into the ground
  • Grease fittings and Spring steel bushings minimize wear at each axle pivot point
  • Six tire options from 21” Laminated to 29” Aircraft allow you customize the ride to your needs

Safety Features

  • Double row chains come standard to prevent thrown objects from exiting the cutter
  • Highway travel lights come standard for safer travel on roadsides and in-between fields

Product Features

The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.

Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.

 

Heavy-duty blade pans and deck rings protect the cutter and gearbox output shaft from unexpected obstacles and blade deflection.

Good for Tractors rated 40hp or under

Specifications

Models
2814
Cutting Width
13′ 6″
Cutting Height
2″ – 14″
Cutting Capacity
3″
Transport Width*
9′
Transport Height**
9′
Transport Length***
17′ 2″
Approximate Weight (lb.)
6,050
Approximate Tongue Weight (lb.)
2,600
Minimum Tractor PTO HP
90
Hitch
“Perma-Level” or Ball Hitch
Center Deck
11ga over 10ga
Wing Decks
10ga
Wing Cutting Angles
22° Down and 45° Up
Wing Level Adjustment
Turnbuckles
Sidebands
1/4″ x 13 1/2″
Transfer Gearbox (HP)
250
Cutting Gearboxes (HP)
225
Input Driveline
Category 6
Cutting Drivelines
Category 5
Blade Holder
7ga Round
Blades
1/2″ x 4″
Blade Tip Speed (fpm)
15,936
Axle Suspension
Springs @ Each Axle
Center & Wing Hydraulics
3 Hoses Standard
Safety Tow Chain
Standard
Distribution Baffles
Optional
PTO Driveline Support
Optional
Warranty
10-Year Gearbox Limited Warranty
1-Year Machine Limited Warranty

 

*Measured from Wing Skid to Wing Skid when Folded

 

**Measured at Maximum Transport Height

 

***Measured from hitch tip to rear of 21″ Laminated Tire

Videos

 

 

Privacy Preference Center