Bush Hog® 2815 Flex-Wing Rotary Cutters

How could Bush Hog® make the best Flex-Wings even better?

Simply put… More value for your investment! The 2815 Flex-Wing is easier to service and has features that maximize performance and durability in all uses. Whether it’s corn stalk shredding, pasture maintenance or roadside cutting, the 2815 is unsurpassed in performance, durability, and reliability.

Notes: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Performance Features

  • Wing skids are 3/8 inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.
  • Center section blades properly align with center wheels to closely cut out the bottom of ditches.
  • Grease fittings and spring steel bushings at axle pivot points for longer life.
  • Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.
  • Optional grass/row crop baffles for improved distribution in grass and corn stalk shredding.

Construction Features

  • Center section axle spindles are centered on the axle arm for equalized loading of vertical forces.
  • Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked.
  • All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times.
  • Greaseable Axle Pivot Points with spring steel bushings
  • Turnbuckle alignment with wing hinge pin ensures long life of turnbuckle and less hinge wear.
  • Powder Coat Paint

Safety Features

  • Improved design of wing sidebands means less damage caused by sideband-to-ground contact.

Product Features

The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.

 

Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.

Good for Tractors rated 40hp or under

Specifications

Models
2815
*Transport Height
7-feet 3-inches
**Transport Width
8-feet 2-inches
Cutting Width
15-feet
Cutting Height
2-inches to 14-inches
Hitch
Self Leveling, “Perma-Level”
Minimum Tractor h.p. @ PTO
60
Side Band
1/4-inch x 12-inches
Blades
1/2-inch x 4-inches
Blade Holder
Round
PTO Drivelines
EZ LUBE ASAE CAT 6 (540) | ASAE CAT 5 or CAT 6 (1,000)
Wing Drivelines
ASAE Cat 4
Wing Flex
22° down / 87° up
Wing Free Float
22° down / 45° up
Splitter Gearbox Rating
250 HP
Cutting Gearbox Rating
225 HP
Gearbox Warranty
6-years
Blade Tip Speed
16,289 FPM @ 540 PTO / 16,000 FPM @ 1000 PTO
Cutting Capacity
4-inches diameter
Top Deck, Center Section
11-gauge
Bottom Deck, Center
7-gauge
Deck, Wings
7-gauge
Axle Cushions
Springs @ each wheel
Wing Adjustment
Turnbuckles
Grass/ Crop Distribution
Optional baffles
Wing & Center Hydraulics
Standard
Safety Tow Chain
Standard
PTO DRIVELINE SUPPORT
Standard
*Measured @ max. Transport heightHitch
**Measured wing skid to wing skid when folded
Warranty: 10 Year Gearbox Limited Warranty | 1 Year Machine Limited Warranty

Videos

Play Video

 

 

Privacy Preference Center