Bush Hog® 4815 Series Flex-Wing

THE EXTREME HEAVY DUTY

The 4815 is the toughest Bush Hog® built Flex-Wing. Built for the roughest and toughest use, the 4815 is for those users who require the strongest 15 ft. Flex-Wing. The roughest right of way or agricultural cutting is no challenge for this unit that’s built to take the ground pounding heavy use every day! See the back page for specifications and features that set the 4815 above all other 15 ft. Flex-Wings regardless of brand. Bush Hog® – Performance You Can Count On.

Notes: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Construction Features

  • Heavy structure on center section and wings.
  • Wing skids are 3/8” thick with an outside angle of 45 degrees to stop “ground dig-in” during turns.
  • All axle spindles are half shafts for quick and less costly maintenance.
  • Center section blades align closely with outside center tires to closely cut out the bottom of ditches.
  • Grease fittings and spring steel bushings are at axle pivot points for longer life.
  • Each cutting gearbox has a 3 inch output shaft with more and deeper splines than competitor models for maximum torque load capabilities.
  • All drivelines are EZ lube with grease points aligned and the cross bearing fitting is in the end cap.

Safety Features

  • Highway Safety Lights Standard

Good for Tractors rated 40hp or under

Specifications

Models
4815
Cutting Width
15′
Cutting Height
2″ – 14″
Cutting Capacity
4 1/2″
Transport Width*
8′ 2″
Transport Height**
7′ 3″
Transport Length***
15′ 3″
Approximate Weight (lb.)
6,200
Approximate Tongue Weight (lb.)
2,700
Minimum Tractor PTO HP
70
Hitch
“Perma-Level” or Ball Hitch
Center Deck
11ga over 7ga
Wing Decks
7ga
Wing Cutting Angles
22° Down and 45° Up
Wing Level Adjustment
Turnbuckles
Sidebands
1/4″ x 13 1/2″
Transfer Gearbox (HP)
250
Cutting Gearboxes (HP)
225
Input Driveline
Category 6
Cutting Drivelines
Category 5
Blade Holder
7ga Round
Blades
1/2″ x 4″
Blade Tip Speed (fpm)
16,268
Axle Suspension
Springs @ Each Axle
Center & Wing Hydraulics
3 Hoses Standard
Safety Tow Chain
Standard
Distribution Baffles
Optional
PTO Driveline Support
Optional
Warranty
10-Year Gearbox Limited Warranty
1-Year Machine Limited Warranty

 

*Measured from Wing Skid to Wing Skid when Folded

 

**Measured at Maximum Transport Height

 

***Measured from hitch tip to rear of 21″ Laminated Tire

Videos

 

 

Privacy Preference Center