Bush Hog® Compact Rear Mounted Blades

For Tractors Up To 24 HP

Bush Hog’s compact rear blades are the ideal choice for light duty landscaping, driveway maintenance, or snow removal. These light duty blades are rated for use on two-wheel drive tractors up to 24 PTO horsepower and four-wheel drive tractors up to 15 PTO horsepower. The moldboard may be reversed for backfilling and angled left or right for use in a wide variety of applications. Tilting of the blade is achieved by adjustment of the tractor’s 3-point hitch arms.

Available in 4, 5, and 6-foot operating widths.

Notes: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Performance Features

  • Three angle position moldboard
  • Reversible moldboard
  • Available in tractor colors
  • Quick hitch capable
  • Lower hitch position for small tractors

Construction Features

  • A Frame Construction
  • 1/4 Inch Moldboard
  • Welded On Cutting Edge
  • Powder Coat Paint

Good for Tractors rated 40hp or under

Specifications

Models
CRB SERIES
MOLDBOARD WIDTH
4, 5 & 6 ft.
MOLDBOARD HEIGHT AND THICKNESS
12 in. x 1/4 in.
MOLDBOARD CUTTING EDGE
3/8 in. x 3 in.
HITCH
3-Pt. Cat. l, Cat I Quick Hitch
APPROXIMATE WEIGHT
136 lbs. (4 ft.), 150 lbs. (5 ft.), 164 lbs. (6 ft.)
MAX. TRACTOR HP (PTO) 2-WHEEL DRIVE
24 HP
MAX. TRACTOR HP (PTO) FRONT WHEEL ASSIST
15 HP
KING PIN DIAMETER
1 1/4 in. Grade 8
TILT ADJUSTMENT
3-Pt. Hitch
OFFSET ADJUSTMENT
None
ANGLE ADJUSTMENT
5 forward positions up to 30º, 3 reverse positions up to 15º
SKID SHOES
N/A
END PLATES
N/A
PARKING STAND
N/A
HYDRAULICS
N/A

Videos

Play Video

 

 

Privacy Preference Center