Bush Hog® 3510 Multi-Spindle Rotary Cutter

Available in Pull or Lift Models

Bush Hog®’s entire line of multi-spindle rotary cutters is designed for heavy crop clearing, pasture maintenance, and other big jobs that require a durable, reliable machine. With cutting widths from 7 to 14-feet, and a range of hitch types and mounting options, these heavy, rigid deck cutters are built to withstand extreme duty and provide superior performance and productivity with minimal maintenance for many, many years.

Notes: Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.

Performance Features

  • 10-feet, 6-inch cutting width
  • Deflector options
  • Folding shields over all cross shafts
  • Wide-angle constant velocity drive-shaft on pull models

Construction Features

  • Structural steel bracing and reinforced welding at all high stress points
  • Shields over all cross shafts fold away for quick access to clutch or universal joints
  • Special rubber-cushioned axle arms reduce shock during operation & transport
  • Wide-angle, constant velocity drive-shaft on pull models relieves the PTO working angle to reduce vibration

Product Features

Special rubber-cushioned axle arms reduce shock loads during operation and transport.

A wide angle, constant velocity driveshaft on pull models relieves the PTO working angle. This reduces vibration and allows smoother cutting in sharp turns.

 

Special rubber-cushioned axle arms reduce shock loads during operation and transport.

Shields over all cross shafts fold conveniently out of the way to allow quick access to clutch or universal joints.

Good for Tractors rated 40hp or under

Specifications

Models
3510
Cutting Width (in)
10-feet, 6-inches
Cutting Capacity
3-1/2-inches Diameter
Cutting Height
2 to 13-inches
Dimensions (width x length)
11-feet, 1-inch x 9-feet, 10-inches (Lift)
Type Hitch
3-Point Cat. II & III Standard & Quick Hitch Cat II & III Semi-mount and Center Pull (Self-Leveling)
Deck Thickness
10-gauge
Side Bands
1/4-inch x 10-inches
Minimum Tractor HP
50 PTO (Pull); 60 PTO (Lift)
Driveline
ASAE Category 5 (540 RPM – Lift, Pull & Semi-Mount)
Cross Shaft
ASAE Cat. 5 Rubber Element
Gearbox HP
(3) 210 Center and 210 Outboard
Tractor PTO Speed
540/1,000 RPM
Driveline Protection
4 Plate PTO Slip Clutch
Height Adjustment for Heavy Duty Axle Only
Manual or Hydraulic
Blade Holder(s)
Round
Blades
1/2-inch x 4-inches – Uplift
Blade Tip Speed (FPM)
16,881 FPM/540 RPM; 17,400/1,000 RPM
Blade Overlap
3-inches
Tires
21 inch Laminated (Lift), Airplane (Pull only)
Axles
Rubber Cushioned; Choice of Single or Dual Axle for Pull Models
Deflectors
Selection: Front Chains and Rear Bands or Chains
Safety Tow Chain
(Pull with Single Axle) 2,741-lbs
Warranty
1-year limited warranty with a 5-year gearbox limited warranty
Features
• High Blade Tip Speeds, Deep Sidebands
• Deep Sidebands
Warranty: 10 Year Gearbox Limited Warranty | 1 Year Machine Limited Warranty

Videos

Play Video

 

 

Privacy Preference Center